Published October 2020
New GX800 Honda V-twin engines offer higher horsepower, improved adaptability, quiet operation, and greater fuel efficiency—not to mention a three-year warranty.
Standard Features: 8 gpm at 4,000 psi, Honda GX800EFI 779 cc, electronic fuel injection, electric start, belt drive general pump TSF2021, 18-in. coil with stainless-steel wrapper, built on EN frame, adjustable temperature control, 7 gallon fuel tanks, hour meter, Racor fuel filter, SDS–soft dampening system for long life of coil, pump, and fittings, and 50-ft. high pressure hose with gun & wand.
Available Options: California compliance, stainless-steel frame, wheel kit, and trailer mount.
RC Series—Our biggest selling compact triplex for semi-commercial applications, created in 2010 as an alternative to our XT range. Designed for belt drive or direct gas (3/4-in. shaft) and electric drives (5/8-in. shaft). With rubber+ fabric HP seals, rubber LP seals, and solid ceramic plungers. Available with built-in unloader with internal by-pass or bolt-on with external by-pass; EZ-Start system and thermal relief valve. Flows from 0.25 gpm (for misting/RO) to 3.5 gpm; pressures up to 2700 psi.
RG series—Created in 2014 as an alternative to our popular RW and SHP range, with the upgrade of having direct access to the inlet valves (RGX). Belt drive at 1450 rpm or 1750 rpm, commercial category with flows from 4 gpm to 5.8 gpm, and pressures up to 7250 psi. Both HP and LP seals are rubber+fabric, solid ceramic plungers. Side cover with oil level indicator. Rear cover with oil drain plug.
RR series—One of our most popular triplex plunger pumps, created in 2012 as an alternative to our industry leading RK range. Belt drive, direct drive for gas engines (1-in. shaft) and electric motors (1 1/8-in. shaft). Rubber+fabric HP seals, rubber LP seals, and solid ceramic plungers all feature. Available with bolt-on unloader with external by-pass; built-in unloader with EZ-Start system and thermal relief valve. Flows from 3 gpm to 5 gpm; pressures up to 4000 psi.
RGX series—Created in 2014 as an alternative to our popular RW and SHP range, with the upgrade of having direct access to the inlet valves (RGX). Belt drive at 1450 rpm or 1750 rpm, commercial category with flows from 4 gpm to 5.8 gpm, and pressures up to 7250 psi. Both HP and LP seals are rubber+fabric, solid ceramic plungers. Side cover with oil level indicator. Rear cover with oil drain plug.
RTD series—Industrial range launched in 2016, offering industrial performance in a robust package. Flows from 26 gpm to 52 gpm, with pressures up to 4350 psi. Both HP and LP seals rubber+ fabric, solid ceramic plungers. Side cover with oil level, rear cover with oil level, and oil discharge plug. Magnetic oil discharge plug for better internal cleaning. Connecting rods in bronze—oversized bearings. Full range of hydraulic drives available for bespoke applications.
RTX series—An extremely popular industrial pump, launched in 2013, with performance and durability matching or exceeding those of much more expensive competitive pumps. For belt drive/hydraulic drive industrial applications, flows from 8 gpm to 40 gpm and pressures up to 7250 psi. Both HP and LP seals rubber+fabric, solid ceramic plungers. Exciting range of hydraulic options tailored to specific customer application demands.
SRG series—A 2019 creation, upgrade on our RG series, covering full specs of our SXW range. Flows from 4 gpm to 5.5 gpm, with pressures up to 5000 psi. For belt drive commercial applications, pumps run at 1450 rpm. Both HP and LP seals rubber+fabric, solid ceramic plungers. Side cover with oil level indicator. Rear cover with oil drain plug.
Eco-Friendly & Waterless Concrete Cleaner
BacKrete® consumes diesel fuel, motor oil, gasoline, kerosene, jet fuel, and oil fuel. BacKrete® is an eco-friendly and waterless concrete cleaner which “seeds” your concrete with natural living, oil-eating bacteria. BacKrete® will consume diesel fuel, motor oil, gasoline, kerosene, jet fuel, fuel oil, and most hydrocarbon-based petroleum stains. A small amount of BacKrete® spread thinly over concrete on a weekly basis will eat the oil stain.
BE Industrial Series
BE Commercial Series 8 gpm, 4,000 psi, gas- diesel-fired hot water pressure washers are engineered for professional users to deliver serious hot water cleaning capability. Features a triplex pump with forged brass manifold, performance proven engine, and electric start. The heavy-duty steel roll-cage, carbon steel heating coil, and stainless-steel coil skin for extra durability. 20-Point inspection ensures quality and durability on these Canadian-built units—The Power You Need.
BE Industrial Series
BE Industrial Series Honda engine gas skid mount hot water pressure washers offer ultimate power in cleaning stubborn grime and grease in professional applications. Delivers up to 200°F hot water and supports dual-gun operation. Heavy-duty reinforced steel tube frame protects your machine. Diesel fired Beckett burner with low voltage inhibitor. Oversize vibration isolators cushion the engine and pump platform. These rugged machines will deliver solid performance—The Power You Need.
For more than 50 years, Cat Pumps has been the industry standard for the longest-lasting high-pressure triplex pumps available for pressure cleaning applications. Backed with the best delivery and customer service, Cat Pumps has a solution for all your high-pressure needs, requiring flows up to 240 gpm and pressures to 10,000 psi. The newly released Model 56HS offers the most economical solution for applications requiring up to 8 gpm at pressures to 3,000 psi.
Here at Coils-R-Us we strive to keep things in stock. As Melvin says, “You can’t give a coil away until someone needs it, and then you can’t get it there fast enough.” We work diligently to keep in stock some of the most common replacement coils that distributors come across out in the field. Once we identify the coil needed, a lot of times we can ship it out the same day. And every coil comes with one free smile!
Comet has combined all of the best features into one with the new P40 diaphragm pump for soft wash applications. A one-piece suction and delivery manifold eliminates the need to work around the gearbox to pull apart and replace multiple fittings. Everything is on one side of the pump and can be replaced in minutes. Thread inserts are molded into the pump heads to avoid leaking between the manifold and the pump head and an increase of flow and pressure (11 gpm @ 300 psi) means more work in less time. Give Comet a call or email email@example.com to learn more about this ground-breaking diaphragm pump.
Cotherm’s bulb and capillary thermostats are specifically manufactured for temperature control in pressure washing applications. Made to withstand high pressures and offered with a variety of fittings, we carry both standard and custom configurations in our Rhode Island warehouse. Visit us at www.cothermna.com or Cotherm NA on LinkedIn and inquire more into what we have to offer. We stand behind our quality, competitive pricing, and customer service!
Pressure Washing Reels
Coxreels® hose reels are essential components in industrial cleaning applications. Our reels are the best choice for high pressure hose management to store and deploy from mobile pressure washer units and shop installations, adding convenience while tackling tough cleaning jobs. Featuring quality engineering, robust steel construction with full-flow fluid paths, and corrosion-resistant finishes, these hose reels are perfectly suited for low- or high-pressure water, washing agents, and other commercial-grade chemicals. Quality matters. USA made.
Custom Machine and Heater Kits
Farley’s Inc. has the capability and flexibility to meet your custom kit and metal fabrication needs for your specific application. These units can be manufactured for diesel, kerosene, propane, or natural gas. Fabricated with mild steel or stainless steel, including stainless steel coils if needed. There are unlimited possibilities with these custom-made kits! Call Farley’s Inc. at (800) 522-2645; we look forward to hearing from you!
New Evolution 4 EV Series Pumps
Coming Soon: New Evolution 4 EV Series Pumps. “HR” coating on manifold 30 times more resistant to corrosion. Flows to 24.8 GPM, pressures of 3625 PSI or more. Triplex Plunger Pump, available in 5 plunger diameters. Patent-pending, symmetrical power end design featuring top and bottom mounting holes allowing for easy left to right shaft conversion. Low-high pressure packing design with integrated cooling system, no greasing required. High volumetric efficiency suction/delivery valves. Splash lubrication.
Giant Industries’ American-made shut-off gun has set the standard for more than 40 years. Built with your needs in mind, the ergonomically designed gun lasts longer and withstands more abuse. Each gun has a 4:1 safety factor (industry standard is 3:1) and comes in weep or non-weep versions. We also back our guns with a guarantee that is twice the length of the competition. When Performance Under Pressure matters, choose a Giant gun. Contact firstname.lastname@example.org.
Giant Industries’ turbo nozzles are the ultimate cleaning tool. Designed to clean more surface in less time, Giant turbo’s help save you money. Light weight and rugged, they help you sell cleaning equipment. Available in multiple angles, pressures, and temperature ratings, we are confident you will find the right one to fit your needs. To help select the best nozzle, contact Giant at email@example.com.
HydraMotion now offers cleaning products for both horizontal and vertical flat surface cleaning. While the SideWinder™ Surface Cleaner has always been our top selling pressure washer accessory, our newest product, the MCA555 cleaner, gives superior cleaning results on all exterior surfaces. It is biodegradable, non-toxic, plant friendly, safe for children and pets, and cost effective! All products are manufactured in HydraMotion’s ISO-9000 compliant facility in Pottstown, PA. Email us at firstname.lastname@example.org or call 800-726-1526 to become a distributor.
Luma Polish 2
Luma Polish 2 is a degreaser/aluminum brightening acid cleaner for the transportation industry. A super-concentrated blend of acids, biodegradable surfactants, and degreasing agents paired with a heavy corrosion inhibitor package makes Luma Polish 2 very economical. Perfect for use on trucks, trailers, and other vehicles where chrome, polished aluminum, stainless steel, glass, or non-ferrous metals exist. Works with a downstream injector in hard or soft water. Removes bugs, glass streaks, brake dust, tough smoke, carbon, grease, oils, nano paint oxide layers, and built-up road film.
The Mi-T-M Biological Water Treatment System is easily customizable to treat and recycle wash water for almost every application. Featuring a closed loop recycle system to clarify water for reuse, the BIO series is designed to operate efficiently for the most environmentally friendly solution to treating waste. For 20-plus years Mi-T-M has designed and manufactured water treatment systems to effectively treat, clarify, and recycle wastewater. The BIO Series is available exclusively from your Mi-T-M Dealer.
This Mi-T-M all-electric belt drive hot water pressure washer series comes standard with a revolutionary heat exchanger cartridge design to provide consistent and efficient on-demand hot water. Supplying a 120°F to 130°F temperature rise within three to five minutes, crews can get right to work cleaning grease and oil from any surface both indoors or out. Featuring an industrial 6.0 or 8.0-HP electric motor, the HAE Series is available exclusively from your Mi-T-M Dealer.
We are proud to announce that we will be upgrading the GX390 charging system on all Dirt Laser SH–SK and Hydro Tek SM–SS and CPS models. The new charging system on the GX390 produces 18 amps.
It will be easy to recognize the machines with the new charging system because the engine color will change from red to black. It is important to have the proper voltage to operate the Beckett 12-volt burner on a hot water pressure washer, which ensures the burner always has the correct voltage to operate even when your battery begins to weaken.
The PowerJet commercial hot water gas (PJO4004-12-K-GP) is our most popular and versatile unit as it is excellent for a wide variety of cleaning needs. This unit comes with a 14 hp Kohler gas engine and can deliver up to 4 gpm at 4000 psi, equipped with general pump–direct drive system, and a 12-volt oil fired burner. Also available in a 13 hp Honda gas engine. Call 877-765-9211 to find a dealer nearest you. View our complete line at www.powerjetpressure.com.
SC-50 & SC-100
Scaltrol’s hard water solutions help commercial customers beat scale build-up, saving them from costly down time and expensive maintenance repairs. To combat corrosion and scaling, Scaltrol scale control systems deposit a microscopic film of polyphosphate sequestrant to all surfaces using our patented venturi dispensing heads. Scaltrol units are easy to install because they are non-electrical, non-magnetic, and non-mechanical. To learn more, go to www.scaltrolinc.com or call 800-868-0629.
NK Series Pumps
UDOR USA’s NK Series Pumps feature improved components for greater durability. Models available from 6.6 to 39.8 gpm. Up to 5075 psi. Thicker, high-polish ceramic plungers. Larger connecting rod wrist pins. Double O-ring bearing flange with oil sight glass. Available with brass or stainless-steel manifolds. Drive options include 30 mm shaft, gear reduction for gas engines, and hydraulic T14 hollow splined shaft.
For more info, call 651-785-0666 or email us at email@example.com.
The new VAL6 FIR-X5 diesel infrared heater brings all of the benefits of Infrared heating with none of the drawbacks of an open flame. The enclosed flame design safely hides the flame away from the outside. X5 is capable of heating large spaces while maintaining safety in confined areas. With the intensity adjusting thermostat, X5 intelligently maintains the desired temperature. Far-Infrared exceeds previous Near-infrared with far greater efficiency. Can you afford not to use VAL6?